Product

 Standard products

You are here: Home - Product List Product List
Crimped Wire Mesh >> Product Standards

Wire Diameter Tolerance:

 +0.010mm (0.80mm - 0.99mm)

 +0.020mm (1.00mm - 2.00mm)

+0.030mm (2.00mm - 4.00mm)

 +0.050mm (4.00mm -12.00mm)

 

Aperture Tolerance:   

  +0.10mm (3 x 3mm -10 x 10mm)

  +0.20mm (10 x 10mm -30 x 30mm)

  +0.50mm (30 x 30mm - 50 x 50mm)

  +1.00mm (above 50 x 50mm)

 

Roll Width Tolerance:

+5mm for width below 1200mm

 

Roll Length Tolerance:

-0.10m for length below 30m

 

Panel Size Tolerance:

-Panle Size(mm) x 0.5%

Copyright @ 2012- 2015 Anping Qinghe Metal Mesh Co., Ltd All Rights Reserved  

Sitemap - Contact