Product

 Standard products

You are here: Home - Product List Product List
Phosphor Bronze Wire Mesh >> Product Standards
Wire Diameter Tolerance:
+0.002mm(0.02-0.099mm)
+0.010mm (0.1-0.99mm)
+0.020mm (1.0-3.0mm)
 
Mesh / Inch Tolerance:   
+0.2mesh(1-8mesh)
+0.5mesh (10-30mesh)
+1.0mesh( 40-60mesh)
+1.5mesh (70-100mesh)
+2.0mesh (110-300mesh)
+3.0mesh (310-400mesh)
 
Width Tolerance:
+5mm for width below 1200mm
 
Length Tolerance:
-0.10m for length below 30m
 
Panel Size Tolerance:
-Panel size(mm) x 0.5%
 
Disc Diameter Tolerance:
+Discs Diameter(mm) x 0.5%

 

Copyright @ 2012- 2015 Anping Qinghe Metal Mesh Co., Ltd All Rights Reserved  

Sitemap - Contact