Razor Wire Types:
Single Concertina Wire
Qinghe Single Concertina Wire is a common type of the concertina wire. This kind of razor wire is installed without clips. It runs in natural loops on walls and fences.
Cross Razor Wire
Qinghe Cross Razor Wire is also called concertina razor wire. This razor wire is bound and clipped with stainless steel razor wire or galvanized wire to make it stronger.
Welded Razor Mesh
Qinghe Welded Razor Mesh is a multi-functional, high security mesh fencing made of straight-blade netting welded together, packaging into a roll form for transport. This product can protect you and your property, and ensure the safety of the protective barriers. The welded razor wire is usually used together with cross razor wire, stopping your step, fighting your fluke mind. We weld the razor wire into diamond mesh or square mesh.
Razor Wire Flat-wrap
Qinghe Razor Wire Flat-wrap is a series of razor wire coils clipped into the panel forms for fencing and security purpose. Razor Wire (flat profile) is designed to protect facilities in urban areas where the high-security concertina spiral razor wire cannot be used because of its bulky size. Razor wire flat-wrap is installed against an existing smooth wire mesh fence and substantially improves the effectiveness of the fence. Installed on this basis, innocent persons are protected from injury by the smooth wire mesh.
The spiral diameter (500 mm, 600 mm, 900 mm) is selected individually for every secured facility or sector. First of all, maximum effectiveness has to be achieved; then goes the possibility and convenience of installation. The bigger the diameter the greater the effectiveness, though the cost of the running meter increases as well. Please note that, as a rule, by ‘coil diameter’ the transportation dimensions are meant. The spiral diameter decreases after stretching and installing. For example, a 500 mm spiral will shrink to 450 mm after installation.
This heavy duty clip is manufactured to have a thickness of 1.6mm and an overall width of 10mm, and is available in either galvanized or stainless steel. This clip, once fastened to the razor wire, requires a force of approximately 1000 newtons before showing signs of opening, making it very difficult to remove, even with specialized tools.
Expanded Metal Hole Terms Discription Drawing
Core Wire Material
60G/SQM or 260G/SQM High Tensile Steel Wire
AISI430, AISI304, AISI304L,
Stainless Steel Wire
120G/SQM Hot Dip Gal. Steel Sheet
AISI430, AISI304, AISI304L,
AISI316, AISI316L Stainless Steel Sheet
Expanded Metal Architectural Design
Expanded Metal Micro Hole
Expanded Metal Grating Heavy Duty
Expanded Aluminum Facade
Expanded Stainless Steel Welded Tube Filter
Expanded Metal Powder Coated See Through Mesh